Tryb drzewa | Tryb normalny

**dragonn** · 11.03.2011 18:46:23

Pokaż wynik dmesg:

Kod:

dmesg > dmesg.log

Wynik pojawi się w pliku dmesg.log w aktualnym folderze (najprawdopodobniej w domowym użytkownika), zrobiłem tak bo będzie tego dużo, ale przed załaduj po kolej oba moduły.

salty · 11.03.2011 18:50:32

Kod:

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Linux version 2.6.35-27-generic (buildd@palmer) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #48-Ubuntu SMP Tue Feb 22 20:25:29 UTC 2011 (Ubuntu 2.6.35-27.48-generic 2.6.35.11)

[    0.000000] BIOS-provided physical RAM map:

[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)

[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)

[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)

[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)

[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)

[    0.000000]  BIOS-e820: 000000001ff70000 - 000000001ff7b000 (ACPI data)

[    0.000000]  BIOS-e820: 000000001ff7b000 - 000000001ff80000 (ACPI NVS)

[    0.000000]  BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)

[    0.000000]  BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved)

[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)

[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)

[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits

[    0.000000] DMI present.

[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.

[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)

[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)

[    0.000000] last_pfn = 0x1ff70 max_arch_pfn = 0x100000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-CFFFF write-protect

[    0.000000]   D0000-DFFFF uncachable

[    0.000000]   E0000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 000000000 mask FE0000000 write-back

[    0.000000]   1 base 01FF80000 mask FFFF80000 uncachable

[    0.000000]   2 base 02FF80000 mask FFFF80000 uncachable

[    0.000000]   3 disabled

[    0.000000]   4 disabled

[    0.000000]   5 disabled

[    0.000000]   6 disabled

[    0.000000]   7 disabled

[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[    0.000000] Scanning 0 areas for low memory corruption

[    0.000000] modified physical RAM map:

[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)

[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)

[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)

[    0.000000]  modified: 00000000000dc000 - 00000000000e0000 (reserved)

[    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)

[    0.000000]  modified: 0000000000100000 - 000000001ff70000 (usable)

[    0.000000]  modified: 000000001ff70000 - 000000001ff7b000 (ACPI data)

[    0.000000]  modified: 000000001ff7b000 - 000000001ff80000 (ACPI NVS)

[    0.000000]  modified: 000000001ff80000 - 0000000020000000 (reserved)

[    0.000000]  modified: 000000002ff80000 - 0000000030000000 (reserved)

[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)

[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)

[    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)

[    0.000000] initial memory mapped : 0 - 00c00000

[    0.000000] found SMP MP-table at [c00f6b70] f6b70

[    0.000000] init_memory_mapping: 0000000000000000-000000001ff70000

[    0.000000]  0000000000 - 0000400000 page 4k

[    0.000000]  0000400000 - 001fc00000 page 2M

[    0.000000]  001fc00000 - 001ff70000 page 4k

[    0.000000] kernel direct mapping tables up to 1ff70000 @ 15000-1a000

[    0.000000] RAMDISK: 1709f000 - 17fd4000

[    0.000000] ACPI: RSDP 000f6c00 00014 (v00 PTLTD )

[    0.000000] ACPI: RSDT 1ff764ba 00030 (v01 PTLTD    RSDT   06040000  LTP 00000000)

[    0.000000] ACPI: FACP 1ff7aec3 00074 (v01 ATI    Chinook  06040000 ATI  000F4240)

[    0.000000] ACPI: DSDT 1ff765e4 048DF (v01    ATI    SB200 06040000 MSFT 0100000E)

[    0.000000] ACPI: FACS 1ff7bfc0 00040

[    0.000000] ACPI: APIC 1ff7af37 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)

[    0.000000] ACPI: SSDT 1ff7af9f 00061 (v01 ATI    CPU1_HTT 06040000 MSFT 0100000E)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] 0MB HIGHMEM available.

[    0.000000] 511MB LOWMEM available.

[    0.000000]   mapped low ram: 0 - 1ff70000

[    0.000000]   low ram: 0 - 1ff70000

[    0.000000] Zone PFN ranges:

[    0.000000]   DMA      0x00000010 -> 0x00001000

[    0.000000]   Normal   0x00001000 -> 0x0001ff70

[    0.000000]   HighMem  empty

[    0.000000] Movable zone start PFN for each node

[    0.000000] early_node_map[2] active PFN ranges

[    0.000000]     0: 0x00000010 -> 0x0000009f

[    0.000000]     0: 0x00000100 -> 0x0001ff70

[    0.000000] On node 0 totalpages: 130815

[    0.000000] free_area_init_node: node 0, pgdat c0801fc0, node_mem_map c1001200

[    0.000000]   DMA zone: 32 pages used for memmap

[    0.000000]   DMA zone: 0 pages reserved

[    0.000000]   DMA zone: 3951 pages, LIFO batch:0

[    0.000000]   Normal zone: 991 pages used for memmap

[    0.000000]   Normal zone: 125841 pages, LIFO batch:31

[    0.000000] Using APIC driver default

[    0.000000] ACPI: PM-Timer IO Port: 0x8008

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ2 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs

[    0.000000] nr_irqs_gsi: 40

[    0.000000] early_res array is doubled to 64 at [16000 - 167ff]

[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000

[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000

[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000

[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000

[    0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:cec00000)

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1

[    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36416 r0 d20928 u2097152

[    0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304

[    0.000000] pcpu-alloc: [0] 0 1 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-27-generic root=UUID=401f1bfe-b0f2-460c-8f2b-c847196b405f ro quiet splash

[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000] Enabling fast FPU save and restore... done.

[    0.000000] Enabling unmasked SIMD FPU exception support... done.

[    0.000000] Initializing CPU#0

[    0.000000] allocated 2618240 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] Subtract (48 early reservations)

[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE

[    0.000000]   #2 [0000100000 - 00009a4adc]   TEXT DATA BSS

[    0.000000]   #3 [001709f000 - 0017fd4000]         RAMDISK

[    0.000000]   #4 [00009a5000 - 00009a80d8]             BRK

[    0.000000]   #5 [00000f6b80 - 0000100000]   BIOS reserved

[    0.000000]   #6 [00000f6b70 - 00000f6b80]    MP-table mpf

[    0.000000]   #7 [000009f800 - 000009fd70]   BIOS reserved

[    0.000000]   #8 [000009fea0 - 00000f6b70]   BIOS reserved

[    0.000000]   #9 [000009fd70 - 000009fea0]    MP-table mpc

[    0.000000]   #10 [0000010000 - 0000011000]      TRAMPOLINE

[    0.000000]   #11 [0000011000 - 0000015000]     ACPI WAKEUP

[    0.000000]   #12 [0000015000 - 0000016000]         PGTABLE

[    0.000000]   #13 [0001000000 - 0001001000]         BOOTMEM

[    0.000000]   #14 [0001001000 - 0001401000]         BOOTMEM

[    0.000000]   #15 [0001401000 - 0001401004]         BOOTMEM

[    0.000000]   #16 [0001401040 - 0001401100]         BOOTMEM

[    0.000000]   #17 [0001401100 - 0001401130]         BOOTMEM

[    0.000000]   #18 [0001401140 - 0001402940]         BOOTMEM

[    0.000000]   #19 [0001402940 - 0001402967]         BOOTMEM

[    0.000000]   #20 [0001402980 - 0001402aec]         BOOTMEM

[    0.000000]   #21 [0001402b00 - 0001402b40]         BOOTMEM

[    0.000000]   #22 [0001402b40 - 0001402b80]         BOOTMEM

[    0.000000]   #23 [0001402b80 - 0001402bc0]         BOOTMEM

[    0.000000]   #24 [0001402bc0 - 0001402c00]         BOOTMEM

[    0.000000]   #25 [0001402c00 - 0001402c40]         BOOTMEM

[    0.000000]   #26 [0001402c40 - 0001402c80]         BOOTMEM

[    0.000000]   #27 [0001402c80 - 0001402cc0]         BOOTMEM

[    0.000000]   #28 [0001402cc0 - 0001402d00]         BOOTMEM

[    0.000000]   #29 [0001402d00 - 0001402d40]         BOOTMEM

[    0.000000]   #30 [0001402d40 - 0001402d80]         BOOTMEM

[    0.000000]   #31 [0001402d80 - 0001402dc0]         BOOTMEM

[    0.000000]   #32 [0001402dc0 - 0001402e00]         BOOTMEM

[    0.000000]   #33 [0001402e00 - 0001402e10]         BOOTMEM

[    0.000000]   #34 [0001402e40 - 0001402eaa]         BOOTMEM

[    0.000000]   #35 [0001402ec0 - 0001402f2a]         BOOTMEM

[    0.000000]   #36 [0001800000 - 000180e000]         BOOTMEM

[    0.000000]   #37 [0001a00000 - 0001a0e000]         BOOTMEM

[    0.000000]   #38 [0001404f40 - 0001404f44]         BOOTMEM

[    0.000000]   #39 [0001404f80 - 0001404f84]         BOOTMEM

[    0.000000]   #40 [0001404fc0 - 0001404fc8]         BOOTMEM

[    0.000000]   #41 [0001405000 - 0001405008]         BOOTMEM

[    0.000000]   #42 [0001405040 - 00014050e8]         BOOTMEM

[    0.000000]   #43 [0001405100 - 0001405168]         BOOTMEM

[    0.000000]   #44 [0001402f40 - 0001404f40]         BOOTMEM

[    0.000000]   #45 [0001405180 - 0001445180]         BOOTMEM

[    0.000000]   #46 [0001445180 - 0001465180]         BOOTMEM

[    0.000000]   #47 [0001466000 - 00016e5380]         BOOTMEM

[    0.000000] Initializing HighMem for node 0 (00000000:00000000)

[    0.000000] Memory: 491620k/523712k available (4935k kernel code, 31640k reserved, 2337k data, 688k init, 0k highmem)

[    0.000000] virtual kernel memory layout:

[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)

[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)

[    0.000000]     vmalloc : 0xe0770000 - 0xff7fe000   ( 496 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)

[    0.000000]       .init : 0xc081b000 - 0xc08c7000   ( 688 kB)

[    0.000000]       .data : 0xc05d1fce - 0xc081a7a8   (2337 kB)

[    0.000000]       .text : 0xc0100000 - 0xc05d1fce   (4935 kB)

[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[    0.000000] Hierarchical RCU implementation.

[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.

[    0.000000]     RCU-based detection of stalled CPUs is disabled.

[    0.000000]     Verbose stalled-CPUs detection is disabled.

[    0.000000] NR_IRQS:2304 nr_irqs:512

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [tty0] enabled

[    0.000000] Fast TSC calibration using PIT

[    0.000000] Detected 3066.591 MHz processor.

[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6133.18 BogoMIPS (lpj=12266364)

[    0.004012] pid_max: default: 32768 minimum: 301

[    0.004034] Security Framework initialized

[    0.004058] AppArmor: AppArmor initialized

[    0.004061] Yama: becoming mindful.

[    0.004130] Mount-cache hash table entries: 512

[    0.004310] Initializing cgroup subsys ns

[    0.004316] Initializing cgroup subsys cpuacct

[    0.004321] Initializing cgroup subsys memory

[    0.004334] Initializing cgroup subsys devices

[    0.004338] Initializing cgroup subsys freezer

[    0.004341] Initializing cgroup subsys net_cls

[    0.004379] CPU: Physical Processor ID: 0

[    0.004382] CPU: Processor Core ID: 0

[    0.004386] mce: CPU supports 4 MCE banks

[    0.004398] CPU0: Thermal monitoring enabled (TM1)

[    0.004412] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.

[    0.004437] ... version:                0

[    0.004440] ... bit width:              40

[    0.004442] ... generic registers:      18

[    0.004445] ... value mask:             000000ffffffffff

[    0.004448] ... max period:             0000007fffffffff

[    0.004450] ... fixed-purpose events:   0

[    0.004452] ... event mask:             000000000003ffff

[    0.011344] ACPI: Core revision 20100428

[    0.020037] ftrace: converting mcount calls to 0f 1f 44 00 00

[    0.020050] ftrace: allocating 21761 entries in 43 pages

[    0.024103] Enabling APIC mode:  Flat.  Using 1 I/O APICs

[    0.024333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.028000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC

[    0.028000] ...trying to set up timer (IRQ0) through the 8259A ...

[    0.028000] ..... (found apic 0 pin 2) ...

[    0.069501] ....... works.

[    0.069504] CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09

[    0.072000] Booting Node   0, Processors  #1 Ok.

[    0.008000] Initializing CPU#1

[    0.160029] Brought up 2 CPUs

[    0.160037] Total of 2 processors activated (12267.12 BogoMIPS).

[    0.160402] devtmpfs: initialized

[    0.161347] regulator: core version 0.5

[    0.161370] Time: 18:11:12  Date: 03/11/11

[    0.161436] NET: Registered protocol family 16

[    0.161490] Trying to unpack rootfs image as initramfs...

[    0.161715] EISA bus registered

[    0.161734] ACPI: bus type pci registered

[    0.191850] PCI: PCI BIOS revision 2.10 entry at 0xfd9a8, last bus=2

[    0.191856] PCI: Using configuration type 1 for base access

[    0.194133] bio: create slab <bio-0> at 0

[    0.196215] ACPI: EC: Look up EC in DSDT

[    0.225377] ACPI: SSDT 1ff7654b 00099 (v01 ATI    CPU0_CST 00000001 MSFT 0100000E)

[    0.227460] ACPI: Dynamic OEM Table Load:

[    0.227491] ACPI: SSDT (null) 00099 (v01 ATI    CPU0_CST 00000001 MSFT 0100000E)

[    0.228198] ACPI: SSDT 1ff764ee 00059 (v01 ATI    CPU1_CST 00000001 MSFT 0100000E)

[    0.230191] ACPI: Dynamic OEM Table Load:

[    0.230221] ACPI: SSDT (null) 00059 (v01 ATI    CPU1_CST 00000001 MSFT 0100000E)

[    0.231431] ACPI: Interpreter enabled

[    0.231461] ACPI: (supports S0 S3 S4 S5)

[    0.231631] ACPI: Using IOAPIC for interrupt routing

[    0.266820] ACPI: Power Resource [FN10] (off)

[    0.269761] ACPI: Power Resource [FN11] (off)

[    0.270848] ACPI: No dock devices found.

[    0.270879] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug

[    0.277544] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.290034] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)

[    0.290066] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)

[    0.290083] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)

[    0.290113] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)

[    0.290142] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)

[    0.290173] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)

[    0.290203] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)

[    0.290221] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)

[    0.290373] pci 0000:00:00.0: reg 10: [mem 0xec000000-0xefffffff pref]

[    0.290417] pci 0000:00:00.0: reg 14: [mem 0xe8000000-0xe8000fff]

[    0.290880] pci 0000:00:13.0: reg 10: [mem 0x000d8000-0x000d8fff]

[    0.291109] pci 0000:00:13.1: reg 10: [mem 0x000d9000-0x000d9fff]

[    0.291401] pci 0000:00:13.2: reg 10: [mem 0xe8003000-0xe8003fff]

[    0.291584] pci 0000:00:13.2: supports D1 D2

[    0.291613] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot

[    0.291643] pci 0000:00:13.2: PME# disabled

[    0.291767] pci 0000:00:14.0: reg 10: [io  0x8060-0x806f]

[    0.291812] pci 0000:00:14.0: reg 14: [mem 0xe8004000-0xe80043ff]

[    0.292061] pci 0000:00:14.1: reg 10: [io  0x01f0-0x01f7]

[    0.292093] pci 0000:00:14.1: reg 14: [io  0x03f4-0x03f7]

[    0.292137] pci 0000:00:14.1: reg 18: [io  0x0170-0x0177]

[    0.292168] pci 0000:00:14.1: reg 1c: [io  0x0374-0x0377]

[    0.292200] pci 0000:00:14.1: reg 20: [io  0x8070-0x807f]

[    0.292674] pci 0000:00:14.5: reg 10: [mem 0xe8004400-0xe80044ff]

[    0.292951] pci 0000:00:14.6: reg 10: [mem 0xe8004800-0xe80048ff]

[    0.293408] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]

[    0.293453] pci 0000:01:05.0: reg 14: [io  0x9000-0x90ff]

[    0.293485] pci 0000:01:05.0: reg 18: [mem 0xe8100000-0xe810ffff]

[    0.293576] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]

[    0.293686] pci 0000:01:05.0: supports D1 D2

[    0.293870] pci 0000:00:01.0: PCI bridge to [bus 01-01]

[    0.293914] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]

[    0.293944] pci 0000:00:01.0:   bridge window [mem 0xe8100000-0xe81fffff]

[    0.293975] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]

[    0.294176] pci 0000:02:04.0: reg 10: [mem 0xe8204000-0xe8205fff]

[    0.294404] pci 0000:02:04.0: supports D1 D2

[    0.294421] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.294450] pci 0000:02:04.0: PME# disabled

[    0.294620] pci 0000:02:07.0: reg 10: [mem 0xe8206000-0xe8206fff]

[    0.294726] pci 0000:02:07.0: supports D1 D2

[    0.294742] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot

[    0.294772] pci 0000:02:07.0: PME# disabled

[    0.294973] pci 0000:02:07.1: reg 10: [mem 0xe8207000-0xe82077ff]

[    0.295018] pci 0000:02:07.1: reg 14: [mem 0xe8200000-0xe8203fff]

[    0.295294] pci 0000:02:07.1: supports D1 D2

[    0.295310] pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot

[    0.295340] pci 0000:02:07.1: PME# disabled

[    0.295537] pci 0000:02:08.0: reg 10: [io  0xa800-0xa87f]

[    0.295582] pci 0000:02:08.0: reg 14: [mem 0xe8207800-0xe820787f]

[    0.295705] pci 0000:02:08.0: reg 30: [mem 0x00000000-0x0001ffff pref]

[    0.295798] pci 0000:02:08.0: supports D1 D2

[    0.295814] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.295844] pci 0000:02:08.0: PME# disabled

[    0.296076] pci 0000:00:14.4: PCI bridge to [bus 02-0a] (subtractive decode)

[    0.296121] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]

[    0.296151] pci 0000:00:14.4:   bridge window [mem 0xe8200000-0xe85fffff]

[    0.296182] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)

[    0.296199] pci 0000:00:14.4:   bridge window [io  0x0000-0xffff] (subtractive decode)

[    0.296228] pci 0000:00:14.4:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)

[    0.296459] pci_bus 0000:00: on NUMA node 0

[    0.296519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[    0.297438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]

[    0.298494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]

[    0.316353] ACPI: PCI Interrupt Link [LNK0] (IRQs 11) *0, disabled.

[    0.317058] ACPI: PCI Interrupt Link [LNK1] (IRQs 10) *0, disabled.

[    0.317884] ACPI: PCI Interrupt Link [LNK2] (IRQs 10) *0, disabled.

[    0.318573] ACPI: PCI Interrupt Link [LNK3] (IRQs 11) *0, disabled.

[    0.318925] HEST: Table is not found!

[    0.319662] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none

[    0.319722] vgaarb: loaded

[    0.321299] SCSI subsystem initialized

[    0.321972] libata version 3.00 loaded.

[    0.322512] usbcore: registered new interface driver usbfs

[    0.322634] usbcore: registered new interface driver hub

[    0.322923] usbcore: registered new device driver usb

[    0.324181] ACPI: WMI: Mapper loaded

[    0.324198] PCI: Using ACPI for IRQ routing

[    0.324229] PCI: pci_cache_line_size set to 64 bytes

[    0.324733] reserve RAM buffer: 000000000009f800 - 000000000009ffff 

[    0.324763] reserve RAM buffer: 000000001ff70000 - 000000001fffffff 

[    0.325699] NetLabel: Initializing

[    0.325716] NetLabel:  domain hash size = 128

[    0.325730] NetLabel:  protocols = UNLABELED CIPSOv4

[    0.325837] NetLabel:  unlabeled traffic allowed by default

[    0.326341] Switching to clocksource tsc

[    0.417727] AppArmor: AppArmor Filesystem Enabled

[    0.417865] pnp: PnP ACPI init

[    0.418097] ACPI: bus type pnp registered

[    0.438201] pnp: PnP ACPI: found 10 devices

[    0.438219] ACPI: ACPI bus type pnp unregistered

[    0.438250] PnPBIOS: Disabled by ACPI PNP

[    0.438386] system 00:07: [io  0x1080] has been reserved

[    0.438417] system 00:07: [io  0x0220-0x022f] has been reserved

[    0.438446] system 00:07: [io  0x040b] has been reserved

[    0.438464] system 00:07: [io  0x04d0-0x04d1] has been reserved

[    0.438494] system 00:07: [io  0x04d6] has been reserved

[    0.438523] system 00:07: [io  0x0530-0x0537] has been reserved

[    0.438553] system 00:07: [io  0x0868] has been reserved

[    0.438570] system 00:07: [io  0x086c] has been reserved

[    0.438600] system 00:07: [io  0x0c00-0x0c01] has been reserved

[    0.438630] system 00:07: [io  0x0c14] has been reserved

[    0.438647] system 00:07: [io  0x0c50-0x0c52] has been reserved

[    0.438677] system 00:07: [io  0x0c6c] has been reserved

[    0.438706] system 00:07: [io  0x0c6f] has been reserved

[    0.438724] system 00:07: [io  0x0cd6-0x0cd7] has been reserved

[    0.438754] system 00:07: [io  0x8000-0x805f] has been reserved

[    0.438785] system 00:07: [io  0xfe00] has been reserved

[    0.438814] system 00:07: [io  0xfe10-0xfe11] has been reserved

[    0.438876] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved

[    0.438936] system 00:08: [mem 0x000ec000-0x000fffff] could not be reserved

[    0.438982] system 00:08: [mem 0x00100000-0x1fffffff] could not be reserved

[    0.439031] system 00:08: [mem 0xfff80000-0xffffffff] has been reserved

[    0.439074] system 00:08: [mem 0xe8000000-0xe8000fff] has been reserved

[    0.487734] pci 0000:00:14.4: BAR 15: assigned [mem 0x30000000-0x35ffffff pref]

[    0.487767] pci 0000:01:05.0: BAR 6: assigned [mem 0xe8120000-0xe813ffff pref]

[    0.487797] pci 0000:00:01.0: PCI bridge to [bus 01-01]

[    0.487826] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]

[    0.487857] pci 0000:00:01.0:   bridge window [mem 0xe8100000-0xe81fffff]

[    0.487887] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]

[    0.487934] pci 0000:02:07.0: BAR 15: assigned [mem 0x30000000-0x33ffffff pref]

[    0.487965] pci 0000:02:07.0: BAR 16: assigned [mem 0x38000000-0x3bffffff]

[    0.487994] pci 0000:02:08.0: BAR 6: assigned [mem 0x34000000-0x3401ffff pref]

[    0.488011] pci 0000:02:07.0: BAR 13: assigned [io  0xa000-0xa0ff]

[    0.488040] pci 0000:02:07.0: BAR 14: assigned [io  0xa400-0xa4ff]

[    0.488057] pci 0000:02:07.0: CardBus bridge to [bus 03-06]

[    0.488073] pci 0000:02:07.0:   bridge window [io  0xa000-0xa0ff]

[    0.488103] pci 0000:02:07.0:   bridge window [io  0xa400-0xa4ff]

[    0.488133] pci 0000:02:07.0:   bridge window [mem 0x30000000-0x33ffffff pref]

[    0.488164] pci 0000:02:07.0:   bridge window [mem 0x38000000-0x3bffffff]

[    0.488194] pci 0000:00:14.4: PCI bridge to [bus 02-0a]

[    0.488223] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]

[    0.488255] pci 0000:00:14.4:   bridge window [mem 0xe8200000-0xe85fffff]

[    0.488285] pci 0000:00:14.4:   bridge window [mem 0x30000000-0x35ffffff pref]

[    0.488457]   alloc irq_desc for 16 on node -1

[    0.488485]   alloc kstat_irqs on node -1

[    0.488548] pci 0000:02:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[    0.488608] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]

[    0.488624] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]

[    0.488654] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]

[    0.488683] pci_bus 0000:01: resource 1 [mem 0xe8100000-0xe81fffff]

[    0.488700] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]

[    0.488729] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]

[    0.488745] pci_bus 0000:02: resource 1 [mem 0xe8200000-0xe85fffff]

[    0.488762] pci_bus 0000:02: resource 2 [mem 0x30000000-0x35ffffff pref]

[    0.488790] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]

[    0.488807] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]

[    0.488836] pci_bus 0000:03: resource 0 [io  0xa000-0xa0ff]

[    0.488852] pci_bus 0000:03: resource 1 [io  0xa400-0xa4ff]

[    0.488869] pci_bus 0000:03: resource 2 [mem 0x30000000-0x33ffffff pref]

[    0.488898] pci_bus 0000:03: resource 3 [mem 0x38000000-0x3bffffff]

[    0.489277] NET: Registered protocol family 2

[    0.489860] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

[    0.491683] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[    0.492112] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)

[    0.492495] TCP: Hash tables configured (established 16384 bind 16384)

[    0.492511] TCP reno registered

[    0.492540] UDP hash table entries: 256 (order: 1, 8192 bytes)

[    0.492587] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

[    0.493304] NET: Registered protocol family 1

[    1.265515] pci 0000:01:05.0: Boot video device

[    1.265623] PCI: CLS 32 bytes, default 64

[    1.266572] cpufreq-nforce2: No nForce2 chipset.

[    1.266832] Scanning for low memory corruption every 60 seconds

[    1.267859] audit: initializing netlink socket (disabled)

[    1.267950] type=2000 audit(1299867073.264:1): initialized

[    1.317114] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[    1.330090] VFS: Disk quotas dquot_6.5.2

[    1.330715] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    1.336272] fuse init (API version 7.14)

[    1.337101] msgmni has been set to 960

[    3.003976] Freeing initrd memory: 15572k freed

[    3.083107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[    3.083125] io scheduler noop registered

[    3.083139] io scheduler deadline registered

[    3.083232] io scheduler cfq registered (default)

[    3.084059] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    3.084209] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    3.087817] ACPI: AC Adapter [ACAD] (on-line)

[    3.088309] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0

[    3.088353] ACPI: Power Button [PWRB]

[    3.088613] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1

[    3.088630] ACPI: Sleep Button [SLPB]

[    3.088967] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2

[    3.089209] ACPI: Lid Switch [LID]

[    3.089482] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

[    3.089499] ACPI: Power Button [PWRF]

[    3.093861] ACPI: Fan [FN1] (off)

[    3.097946] ACPI: Fan [FN2] (off)

[    3.098650] ACPI: acpi_idle registered with cpuidle

[    3.102404] ACPI: Invalid passive threshold

[    4.143257] thermal LNXTHERM:01: registered as thermal_zone0

[    4.143317] ACPI: Thermal Zone [THRM] (70 C)

[    4.144066] ERST: Table is not found!

[    4.145533] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    4.146284] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[    4.147036] ACPI: Battery Slot [BAT0] (battery absent)

[    4.147144] isapnp: Scanning for PnP cards...

[    4.148075]   alloc irq_desc for 17 on node -1

[    4.148091]   alloc kstat_irqs on node -1

[    4.148139] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[    4.148182] serial 0000:00:14.6: PCI INT B disabled

[    4.156920] brd: module loaded

[    4.161139] loop: module loaded

[    4.162904] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[    4.165534] Fixed MDIO Bus: probed

[    4.165809] PPP generic driver version 2.4.2

[    4.166130] tun: Universal TUN/TAP device driver, 1.6

[    4.166145] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[    4.166805] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    4.166956]   alloc irq_desc for 19 on node -1

[    4.166971]   alloc kstat_irqs on node -1

[    4.167018] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19

[    4.167141] ehci_hcd 0000:00:13.2: EHCI Host Controller

[    4.167387] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1

[    4.167661] ehci_hcd 0000:00:13.2: irq 19, io mem 0xe8003000

[    4.177084] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00

[    4.177975] hub 1-0:1.0: USB hub found

[    4.178018] hub 1-0:1.0: 6 ports detected

[    4.178600] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    4.178694] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19

[    4.178739] ohci_hcd 0000:00:13.0: OHCI Host Controller

[    4.178998] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2

[    4.179076] ohci_hcd 0000:00:13.0: irq 19, io mem 0x000d8000

[    4.514884] isapnp: No Plug & Play device found

[    4.603887] hub 2-0:1.0: USB hub found

[    4.603919] hub 2-0:1.0: 3 ports detected

[    4.604411] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19

[    4.604455] ohci_hcd 0000:00:13.1: OHCI Host Controller

[    4.604702] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3

[    4.604792] ohci_hcd 0000:00:13.1: irq 19, io mem 0x000d9000

[    5.030858] hub 3-0:1.0: USB hub found

[    5.030890] hub 3-0:1.0: 3 ports detected

[    5.031318] uhci_hcd: USB Universal Host Controller Interface driver

[    5.031918] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[    5.033778] i8042.c: Detected active multiplexing controller, rev 1.1.

[    5.034146] serio: i8042 KBD port at 0x60,0x64 irq 1

[    5.034191] serio: i8042 AUX0 port at 0x60,0x64 irq 12

[    5.034223] serio: i8042 AUX1 port at 0x60,0x64 irq 12

[    5.034254] serio: i8042 AUX2 port at 0x60,0x64 irq 12

[    5.034285] serio: i8042 AUX3 port at 0x60,0x64 irq 12

[    5.034959] mice: PS/2 mouse device common for all mice

[    5.036054] rtc_cmos 00:03: RTC can wake from S4

[    5.036330] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

[    5.036421] rtc0: alarms up to one day, 114 bytes nvram

[    5.037249] device-mapper: uevent: version 1.0.3

[    5.038080] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com

[    5.038694] device-mapper: multipath: version 1.1.1 loaded

[    5.038712] device-mapper: multipath round-robin: version 1.0.0 loaded

[    5.039586] EISA: Probing bus 0 at eisa.0

[    5.039662] Cannot allocate resource for EISA slot 1

[    5.039767] Cannot allocate resource for EISA slot 8

[    5.039770] EISA: Detected 0 cards.

[    5.040553] cpuidle: using governor ladder

[    5.040569] cpuidle: using governor menu

[    5.040922] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4

[    5.043434] TCP cubic registered

[    5.044349] NET: Registered protocol family 10

[    5.047061] lo: Disabled Privacy Extensions

[    5.048848] NET: Registered protocol family 17

[    5.049295] Using IPI No-Shortcut mode

[    5.049936] PM: Resume from disk failed.

[    5.050015] registered taskstats version 1

[    5.050946]   Magic number: 3:333:190

[    5.051378] rtc_cmos 00:03: setting system clock to 2011-03-11 18:11:17 UTC (1299867077)

[    5.051406] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[    5.051408] EDD information not available.

[    5.051899] Freeing unused kernel memory: 688k freed

[    5.055374] Write protecting the kernel text: 4936k

[    5.055680] Write protecting the kernel read-only data: 1980k

[    5.201375] udev[78]: starting version 163

[    5.941974] Linux agpgart interface v0.103

[    6.096871] agpgart-ati 0000:00:00.0: Ati IGP9100/M chipset

[    6.097328] reserve_ram_pages_type failed 0x1cd93000-0x1cd94000, track 0x10, req 0x10

[    6.098891] reserve_ram_pages_type failed 0x1cf23000-0x1cf24000, track 0x10, req 0x10

[    6.100785] reserve_ram_pages_type failed 0x1cfc2000-0x1cfc3000, track 0x10, req 0x10

[    6.102455] reserve_ram_pages_type failed 0x17827000-0x17828000, track 0x10, req 0x10

[    6.104092] reserve_ram_pages_type failed 0x1cdc9000-0x1cdca000, track 0x10, req 0x10

[    6.160464] reserve_ram_pages_type failed 0x1cfea000-0x1cfeb000, track 0x10, req 0x10

[    6.161949] reserve_ram_pages_type failed 0x1cfdf000-0x1cfe0000, track 0x10, req 0x10

[    6.163419] reserve_ram_pages_type failed 0x1cfdc000-0x1cfdd000, track 0x10, req 0x10

[    6.172506] reserve_ram_pages_type failed 0x1cff2000-0x1cff3000, track 0x10, req 0x10

[    6.174176] reserve_ram_pages_type failed 0x1cf13000-0x1cf14000, track 0x10, req 0x10

[    6.175828] reserve_ram_pages_type failed 0x1cf99000-0x1cf9a000, track 0x10, req 0x10

[    6.177435] reserve_ram_pages_type failed 0x1cfb4000-0x1cfb5000, track 0x10, req 0x10

[    6.179012] reserve_ram_pages_type failed 0x1cf42000-0x1cf43000, track 0x10, req 0x10

[    6.197125] reserve_ram_pages_type failed 0x1ce94000-0x1ce95000, track 0x10, req 0x10

[    6.198751] reserve_ram_pages_type failed 0x1cf9a000-0x1cf9b000, track 0x10, req 0x10

[    6.200414] reserve_ram_pages_type failed 0x1ce80000-0x1ce81000, track 0x10, req 0x10

[    6.202130] reserve_ram_pages_type failed 0x1782e000-0x1782f000, track 0x10, req 0x10

[    6.257567] agpgart-ati 0000:00:00.0: AGP aperture is 64M @ 0xec000000

[    6.275474]   alloc irq_desc for 18 on node -1

[    6.275503]   alloc kstat_irqs on node -1

[    6.275563] 3c59x 0000:02:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[    6.275687] 3c59x: Donald Becker and others.

[    6.275733] 0000:02:08.0: 3Com PCI 3c920B-EMB-WNM (ATI Radeon 9100 IGP) at e0888800.

[    6.320197] scsi0 : pata_atiixp

[    6.352360] scsi1 : pata_atiixp

[    6.365660] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8070 irq 14

[    6.365704] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8078 irq 15

[    6.529864] [drm] Initialized drm 1.1.0 20060810

[    6.677339] ata2.00: ATAPI: PIONEER DVD-RW  DVR-K12D, 1.10, max UDMA/33

[    6.678678] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100

[    6.678706] ata1.00: 117210240 sectors, multi 16: LBA48 

[    6.685221] ata2.00: configured for UDMA/33

[    6.693422] ata1.00: configured for UDMA/100

[    6.694237] scsi 0:0:0:0: Direct-Access     ATA      IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5

[    6.695800] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    6.696998] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)

[    6.697367] sd 0:0:0:0: [sda] Write Protect is off

[    6.697383] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    6.697779] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    6.699850]  sda:

[    6.703008] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-K12D 1.10 PQ: 0 ANSI: 5

[    6.723605] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray

[    6.723623] Uniform CD-ROM driver Revision: 3.20

[    6.724801] sr 1:0:0:0: Attached scsi CD-ROM sr0

[    6.725813] sr 1:0:0:0: Attached scsi generic sg1 type 5

[    6.733068]  sda1 sda2 < sda5 sda6 >

[    6.767377] sd 0:0:0:0: [sda] Attached SCSI disk

[    6.798823] firewire_ohci 0000:02:07.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[    6.853647] firewire_ohci: Added fw-ohci device 0000:02:07.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2

[    7.096295] [drm] radeon defaulting to kernel modesetting.

[    7.096312] [drm] radeon kernel modesetting enabled.

[    7.096695] radeon 0000:01:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[    7.108177] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50).

[    7.108996] [drm] register mmio base: 0xE8100000

[    7.108999] [drm] register mmio size: 65536

[    7.109888] agpgart-ati 0000:00:00.0: AGP 3.0 bridge

[    7.109978] agpgart-ati 0000:00:00.0: putting AGP V3 device into 8x mode

[    7.110117] radeon 0000:01:05.0: putting AGP V3 device into 8x mode

[    7.110254] radeon 0000:01:05.0: GTT: 64M 0xEC000000 - 0xEFFFFFFF

[    7.110271] [drm] Generation 2 PCI interface, using max accessible memory

[    7.110300] radeon 0000:01:05.0: VRAM: 128M 0xF0000000 - 0xF7FFFFFF (64M used)

[    7.110544] [drm] radeon: irq initialized.

[    7.111129] [drm] Detected VRAM RAM=128M, BAR=128M

[    7.111173] [drm] RAM width 128bits DDR

[    7.111718] [TTM] Zone  kernel: Available graphics memory: 253940 kiB.

[    7.111733] [TTM] Initializing pool allocator.

[    7.111870] [drm] radeon: 64M of VRAM memory ready

[    7.111885] [drm] radeon: 64M of GTT memory ready.

[    7.112468] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.

[    7.112820] [drm] Loading R300 Microcode

[    7.136439] [drm] radeon: ring at 0x00000000EC000000

[    7.136514] [drm] ring test succeeded in 0 usecs

[    7.138518] [drm] radeon: ib pool ready.

[    7.139006] [drm] ib test succeeded in 0 usecs

[    7.139896] [drm] Panel ID String: 1024x768                

[    7.139926] [drm] Panel Size 1024x768

[    7.140338] [drm] Default TV standard: NTSC

[    7.140355] [drm] 27.000000000 MHz TV ref clk

[    7.140370] [drm] No TV DAC info found in BIOS

[    7.140388] [drm] Default TV standard: NTSC

[    7.140402] [drm] 27.000000000 MHz TV ref clk

[    7.140661] [drm] Radeon Display Connectors

[    7.140678] [drm] Connector 0:

[    7.140693] [drm]   VGA

[    7.140722] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60

[    7.140738] [drm]   Encoders:

[    7.140753] [drm]     CRT1: INTERNAL_DAC1

[    7.140768] [drm] Connector 1:

[    7.140770] [drm]   LVDS

[    7.140784] [drm]   Encoders:

[    7.140799] [drm]     LCD1: INTERNAL_LVDS

[    7.140814] [drm] Connector 2:

[    7.140828] [drm]   S-video

[    7.140831] [drm]   Encoders:

[    7.140847] [drm]     TV1: INTERNAL_DAC2

[    7.143981] [drm] radeon: power management initialized

[    7.228111] [drm] fb mappable at 0xF0040000

[    7.228140] [drm] vram apper at 0xF0000000

[    7.228155] [drm] size 3145728

[    7.228170] [drm] fb depth is 24

[    7.228185] [drm]    pitch is 4096

[    7.321647] Console: switching to colour frame buffer device 128x48

[    7.359163] firewire_core: created device fw0: GUID 0040ca0128107606, S400

[    7.380758] fb0: radeondrmfb frame buffer device

[    7.380775] drm: registered panic notifier

[    7.380806] Slow work thread pool: Starting up

[    7.381275] Slow work thread pool: Ready

[    7.381324] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0

[    8.676700] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)

[   23.560696] Adding 2000056k swap on /dev/sda5.  Priority:-1 extents:1 across:2000056k 

[   23.887580] udev[339]: starting version 163

[   24.125904] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro

[   24.284639] lp: driver loaded but no devices found

[   24.971233] ACPI: resource piix4_smbus [io  0x8060-0x8067] conflicts with ACPI region SOW_ [??? 0x00008000-0x0000809f flags 0x5f]

[   24.971264] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[   25.020976] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   26.359483] yenta_cardbus 0000:02:07.0: CardBus bridge found [1509:3350]

[   26.359578] yenta_cardbus 0000:02:07.0: Using CSCINT to route CSC interrupts to PCI

[   26.359594] yenta_cardbus 0000:02:07.0: Routing CardBus interrupts to PCI

[   26.359637] yenta_cardbus 0000:02:07.0: TI: mfunc 0x01021c22, devctl 0x44

[   26.431480] cfg80211: Calling CRDA to update world regulatory domain

[   26.590247] yenta_cardbus 0000:02:07.0: ISA IRQ mask 0x0cf8, PCI irq 16

[   26.590279] yenta_cardbus 0000:02:07.0: Socket status: 30000086

[   26.590356] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge window: [io  0xa000-0xafff]

[   26.590399] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: excluding 0xa000-0xa0ff 0xa400-0xa4ff 0xa800-0xa87f

[   26.673979] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge window: [mem 0xe8200000-0xe85fffff]

[   26.674038] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8200000-0xe85fffff: excluding 0xe8200000-0xe823ffff

[   26.674162] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge window: [mem 0x30000000-0x35ffffff pref]

[   26.674191] pcmcia_socket pcmcia_socket0: cs: memory probe 0x30000000-0x35ffffff: excluding 0x30000000-0x35ffffff

[   26.844895] Synaptics Touchpad, model: 1, fw: 5.6, id: 0x9244b1, caps: 0x80471b/0x0/0x0

[   26.885673] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5

[   27.556625] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x22f 0x2f8-0x2ff 0x370-0x377

[   27.572353] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7

[   27.615795] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding 0x860-0x86f

[   27.618104] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7

[   27.619755] cfg80211: World regulatory domain updated:

[   27.619774] 

[   27.619800]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[   27.619830]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   27.619847]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[   27.619864]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[   27.619892]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   27.619909]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   27.620447] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xd8000-0xdffff 0xe4000-0xfffff

[   27.650285] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.

[   27.651203] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.

[   27.651906] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.

[   27.673175] type=1400 audit(1299863500.118:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=611 comm="apparmor_parser"

[   27.685950] p54pci 0000:02:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19

[   27.699002] type=1400 audit(1299863500.142:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=611 comm="apparmor_parser"

[   27.713155] type=1400 audit(1299863500.158:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=611 comm="apparmor_parser"

[   27.840759] p54pci 0000:02:04.0: Cannot find firmware (isl3886pci)

[   27.880600] p54pci 0000:02:04.0: PCI INT A disabled

[   27.880660] p54pci: probe of 0000:02:04.0 failed with error -2

[   28.720923] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[   29.304260] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[   29.925939] type=1400 audit(1299863502.370:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=783 comm="apparmor_parser"

[   29.943091] type=1400 audit(1299863502.386:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=788 comm="apparmor_parser"

[   29.952028] type=1400 audit(1299863502.394:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=789 comm="apparmor_parser"

[   29.960458] type=1400 audit(1299863502.406:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=783 comm="apparmor_parser"

[   29.989790] type=1400 audit(1299863502.434:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=789 comm="apparmor_parser"

[   29.991429] type=1400 audit(1299863502.434:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=789 comm="apparmor_parser"

[   30.210764] type=1400 audit(1299863502.654:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=798 comm="apparmor_parser"

[   30.354566] ppdev: user-space parallel port driver

[   30.402463] eth0:  setting full-duplex.

[   34.835590] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0

[   40.800135] eth0: no IPv6 routers present

[   41.065940] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0

[   83.708234] padlock: VIA PadLock not detected.

[  181.853664] Loaded prism54 driver, version 1.2

[  181.853989] prism54 0000:02:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19

[  181.947100] eth1: resetting device...

[  181.947175] eth1: uploading firmware...

[  182.018154] prism54: request_firmware() failed for 'isl3890'

[  182.018185] eth1: could not upload firmware ('isl3890')

[  182.018201] eth1: islpci_reset: failure

[  255.708544] lo: Disabled Privacy Extensions

[ 1613.060294] hub 1-0:1.0: over-current change on port 6

[ 1613.225654] hub 1-0:1.0: over-current change on port 6

[ 1613.383552] hub 1-0:1.0: over-current change on port 6

[ 1613.518388] hub 1-0:1.0: over-current change on port 6

[ 1613.655308] hub 1-0:1.0: over-current change on port 6

[ 1613.787560] hub 1-0:1.0: over-current change on port 6

[ 1613.919704] hub 1-0:1.0: over-current change on port 6

[ 1614.052840] hub 1-0:1.0: over-current change on port 6

[ 1614.188829] hub 1-0:1.0: over-current change on port 6

[ 1614.349342] hub 1-0:1.0: over-current change on port 6

[ 1614.505250] hub 1-0:1.0: over-current change on port 6

[ 1614.670388] hub 1-0:1.0: over-current change on port 6

[ 1614.812004] hub 1-0:1.0: over-current change on port 6

**dragonn** · 11.03.2011 19:54:23

https://bugs.launchpad.net/ubuntu/+sourc...bug/524713 chyba ten sam problem i rozwiązanie. Z tego co wyczytałem trzeba zrobić:

Kod:

sudo ln -s /lib/firmware/prism54_softmac/isl3886pci /lib/firmware/isl3886pci

Po tym załadować moduł i powinno śmigać. Niby auktalizacjia została już wydana, ale może akurat jej nie masz. A jeżeli to nie zadziała to pobierz http://packages.ubuntu.com/maverick/linu...re-nonfree i zainstaluj, jeżeli masz neta po kablu to powinno wystarczyć:

Kod:

sudo apt-get install linux-firmware-nonfree

salty · 11.03.2011 20:35:17

dzięki pomogło.
A czego to była wina, że wi-fi nie działało

**Kwpolska** · 11.03.2011 20:59:44

tego, że firmware’u nie posiadałoś?

xnivel · 13.03.2011 02:16:54

raczej tego że w paczce nie było przewidziane używanie twojej karty i trzeba było użyć sterownika od innej karty sieciowej.

pytanie tylko czy to nie mogło od razu tak być?

**dragonn** · 13.03.2011 09:18:59

xnivel dlatego że sytuacja licencji do tego firmware nie jest wyjaśniona, dlatego został przeniesiony do nonfree. Głównie chodzi o to żeby nie wchodzić w konflikt z prawem amerykańskim, jak myślisz dlaczego w ubuntu nie ma out-of-box flash, zamkniętych kodeków itp.

xnivel · 13.03.2011 14:26:27

ale skoro instaluje sterowniki i jeden pasuje do paru to mogło by to jednak działać tak ze nie muszę sam z siebie linkować folderów tylko od początku powinien istnieć odpowiedni katalog z sterownikiem. Ponieważ problemem w tej sytuacji był brak /lib/firmware/isl3886pci a nie samego sterownika jako takiego.

w0jt4ss · 22.04.2011 18:41:36

Witam, mam ten sam problem. Od razu wrzucam to co wczesniej wam pomogło Smile

Kod:

lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:off/any  

          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   

          Retry  long limit:7   RTS thr:off   Fragment thr:off

          Encryption key:off

          Power Management:off

root@Wojtas ~]# lspci

00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a3)

01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a3)

01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)

01.3 Co-processor: nVidia Corporation MCP65 SMU (rev a1)

02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3)

02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3)

06.0 Ethernet controller: nVidia Corporation MCP65 Ethernet (rev a3)

07.0 Audio device: nVidia Corporation MCP65 High Definition Audio (rev a1)

08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1)

09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1)

0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a3)

0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1)

0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)

0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)

0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)

18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration

18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map

18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller

18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)

00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1)

05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)

05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)

05.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)

05.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)

[root@Wojtas ~]# 

root@Wojtas ~]# lspci

00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a3)

01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a3)

01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)

01.3 Co-processor: nVidia Corporation MCP65 SMU (rev a1)

02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3)

02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3)

06.0 Ethernet controller: nVidia Corporation MCP65 Ethernet (rev a3)

07.0 Audio device: nVidia Corporation MCP65 High Definition Audio (rev a1)

08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1)

09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1)

0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a3)

0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1)

0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)

0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)

0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)

18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration

18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map

18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller

18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)

00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1)

05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)

05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)

05.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)

05.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)

[root@Wojtas ~]#

i

Kod:

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Linux version 2.6.35.6-45.fc14.i686 (mockbuild@x86-16.phx2.fedoraproject.org) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Mon Oct 18 23:56:17 UTC 2010

[    0.000000] BIOS-provided physical RAM map:

[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)

[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)

[    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)

[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ff60000 (usable)

[    0.000000]  BIOS-e820: 000000007ff60000 - 000000007ff6e000 (ACPI data)

[    0.000000]  BIOS-e820: 000000007ff6e000 - 000000007ff6f000 (ACPI NVS)

[    0.000000]  BIOS-e820: 000000007ff6f000 - 0000000080000000 (reserved)

[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)

[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)

[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)

[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!

[    0.000000] DMI present.

[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)

[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)

[    0.000000] last_pfn = 0x7ff60 max_arch_pfn = 0x100000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-CFFFF write-protect

[    0.000000]   D0000-DEFFF uncachable

[    0.000000]   DF000-DFFFF write-protect

[    0.000000]   E0000-E3FFF uncachable

[    0.000000]   E4000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 0000000000 mask FF80000000 write-back

[    0.000000]   1 disabled

[    0.000000]   2 disabled

[    0.000000]   3 disabled

[    0.000000]   4 disabled

[    0.000000]   5 disabled

[    0.000000]   6 disabled

[    0.000000]   7 disabled

[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[    0.000000] initial memory mapped : 0 - 01000000

[    0.000000] found SMP MP-table at [c00f8650] f8650

[    0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000

[    0.000000]  0000000000 - 0000400000 page 4k

[    0.000000]  0000400000 - 0036c00000 page 2M

[    0.000000]  0036c00000 - 0036ffe000 page 4k

[    0.000000] kernel direct mapping tables up to 36ffe000 @ 7000-e000

[    0.000000] RAMDISK: 373a5000 - 37ff0000

[    0.000000] Allocated new RAMDISK: 00c31000 - 0187b1e5

[    0.000000] Move RAMDISK from 00000000373a5000 - 0000000037fef1e4 to 00c31000 - 0187b1e4

[    0.000000] ACPI: RSDP 000f85a0 00024 (v02 PTLTD )

[    0.000000] ACPI: XSDT 7ff648e8 0006C (v01 HPQOEM SLIC-MPC 06040000  LTP 00000000)

[    0.000000] ACPI: FACP 7ff6d8e8 000F4 (v03 NVIDIA MCP65-E  06040000 PTL_ 000F4240)

[    0.000000] ACPI: DSDT 7ff64954 08F20 (v01 NVIDIA    MCP65 06040000 MSFT 03000000)

[    0.000000] ACPI: FACS 7ff6efc0 00040

[    0.000000] ACPI: SRAT 7ff6d9dc 000A0 (v01 AMD    HAMMER   06040000 AMD  00000001)

[    0.000000] ACPI: WDAT 7ff6da7c 00104 (v01 PTLTD  WDATTBL  06040000  LTP 00000001)

[    0.000000] ACPI: SSDT 7ff6db80 00206 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)

[    0.000000] ACPI: MCFG 7ff6dd86 0003C (v01 HP       MCFG   06040000  LTP 00000000)

[    0.000000] ACPI: HPET 7ff6ddc2 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)

[    0.000000] ACPI: APIC 7ff6ddfa 00068 (v01 HP     ? APIC   06040000  LTP 00000000)

[    0.000000] ACPI: BOOT 7ff6de62 00028 (v01     HP $SBFTBL$ 06040000  LTP 00000001)

[    0.000000] ACPI: SLIC 7ff6de8a 00176 (v01 HPQOEM SLIC-MPC 06040000  LTP 00000001)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] 1167MB HIGHMEM available.

[    0.000000] 879MB LOWMEM available.

[    0.000000]   mapped low ram: 0 - 36ffe000

[    0.000000]   low ram: 0 - 36ffe000

[    0.000000]   node 0 low ram: 00000000 - 36ffe000

[    0.000000]   node 0 bootmap 0000b000 - 00011e00

[    0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 0036ffe000]

[    0.000000]   #0 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]

[    0.000000]   #1 [0000400000 - 0000c2b8c0]    TEXT DATA BSS ==> [0000400000 - 0000c2b8c0]

[    0.000000]   #2 [0000c2c000 - 0000c30150]              BRK ==> [0000c2c000 - 0000c30150]

[    0.000000]   #3 [00000f8660 - 0000100000]    BIOS reserved ==> [00000f8660 - 0000100000]

[    0.000000]   #4 [00000f8650 - 00000f8660]     MP-table mpf ==> [00000f8650 - 00000f8660]

[    0.000000]   #5 [000009dc00 - 000009e171]    BIOS reserved ==> [000009dc00 - 000009e171]

[    0.000000]   #6 [000009e285 - 00000f8650]    BIOS reserved ==> [000009e285 - 00000f8650]

[    0.000000]   #7 [000009e171 - 000009e285]     MP-table mpc ==> [000009e171 - 000009e285]

[    0.000000]   #8 [0000002000 - 0000003000]       TRAMPOLINE ==> [0000002000 - 0000003000]

[    0.000000]   #9 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]

[    0.000000]   #10 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]

[    0.000000]   #11 [0000c31000 - 000187c000]      NEW RAMDISK ==> [0000c31000 - 000187c000]

[    0.000000]   #12 [000000b000 - 0000012000]          BOOTMAP ==> [000000b000 - 0000012000]

[    0.000000] Zone PFN ranges:

[    0.000000]   DMA      0x00000001 -> 0x00001000

[    0.000000]   Normal   0x00001000 -> 0x00036ffe

[    0.000000]   HighMem  0x00036ffe -> 0x0007ff60

[    0.000000] Movable zone start PFN for each node

[    0.000000] early_node_map[2] active PFN ranges

[    0.000000]     0: 0x00000001 -> 0x0000009d

[    0.000000]     0: 0x00000100 -> 0x0007ff60

[    0.000000] On node 0 totalpages: 524028

[    0.000000] free_area_init_node: node 0, pgdat c09fe0c0, node_mem_map c187d020

[    0.000000]   DMA zone: 32 pages used for memmap

[    0.000000]   DMA zone: 0 pages reserved

[    0.000000]   DMA zone: 3964 pages, LIFO batch:0

[    0.000000]   Normal zone: 1728 pages used for memmap

[    0.000000]   Normal zone: 219454 pages, LIFO batch:31

[    0.000000]   HighMem zone: 2335 pages used for memmap

[    0.000000]   HighMem zone: 296515 pages, LIFO batch:31

[    0.000000] Using APIC driver default

[    0.000000] Detected use of extended apic ids on hypertransport bus

[    0.000000] ACPI: PM-Timer IO Port: 0x1008

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ2 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000

[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs

[    0.000000] nr_irqs_gsi: 40

[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000

[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000

[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000

[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000

[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1

[    0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s35072 r0 d22272 u2097152

[    0.000000] pcpu-alloc: s35072 r0 d22272 u2097152 alloc=1*4194304

[    0.000000] pcpu-alloc: [0] 0 1 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519933

[    0.000000] Kernel command line: ro root=/dev/mapper/vg_wojtas-lv_root rd_LVM_LV=vg_wojtas/lv_root rd_LVM_LV=vg_wojtas/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=pl_PL.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=pl2 rhgb quiet

[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Enabling fast FPU save and restore... done.

[    0.000000] Enabling unmasked SIMD FPU exception support... done.

[    0.000000] Initializing CPU#0

[    0.000000] allocated 10482540 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] Initializing HighMem for node 0 (00036ffe:0007ff60)

[    0.000000] Memory: 2047520k/2096512k available (3762k kernel code, 48592k reserved, 2497k data, 544k init, 1195400k highmem)

[    0.000000] virtual kernel memory layout:

[    0.000000]     fixmap  : 0xff575000 - 0xfffff000   (10792 kB)

[    0.000000]     pkmap   : 0xff000000 - 0xff400000   (4096 kB)

[    0.000000]     vmalloc : 0xf77fe000 - 0xfeffe000   ( 120 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xf6ffe000   ( 879 MB)

[    0.000000]       .init : 0xc0a1d000 - 0xc0aa5000   ( 544 kB)

[    0.000000]       .data : 0xc07aca76 - 0xc0a1cf70   (2497 kB)

[    0.000000]       .text : 0xc0400000 - 0xc07aca76   (3762 kB)

[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[    0.000000] Hierarchical RCU implementation.

[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.

[    0.000000]     RCU-based detection of stalled CPUs is disabled.

[    0.000000]     Verbose stalled-CPUs detection is disabled.

[    0.000000] NR_IRQS:2304

[    0.000000] Extended CMOS year: 2000

[    0.000000] spurious 8259A interrupt: IRQ7.

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [tty0] enabled

[    0.000000] hpet clockevent registered

[    0.000000] Fast TSC calibration using PIT

[    0.000000] Detected 1908.951 MHz processor.

[    0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3817.90 BogoMIPS (lpj=1908951)

[    0.001014] pid_max: default: 32768 minimum: 301

[    0.001054] Security Framework initialized

[    0.001066] SELinux:  Initializing.

[    0.001078] SELinux:  Starting in permissive mode

[    0.001173] Mount-cache hash table entries: 512

[    0.001396] Initializing cgroup subsys ns

[    0.001403] Initializing cgroup subsys cpuacct

[    0.001412] Initializing cgroup subsys memory

[    0.001427] Initializing cgroup subsys devices

[    0.002007] Initializing cgroup subsys freezer

[    0.002011] Initializing cgroup subsys net_cls

[    0.002016] Initializing cgroup subsys blkio

[    0.002063] CPU: Physical Processor ID: 0

[    0.002067] CPU: Processor Core ID: 0

[    0.002072] mce: CPU supports 5 MCE banks

[    0.002084] using C1E aware idle routine

[    0.002094] Performance Events: AMD PMU driver.

[    0.002107] ... version:                0

[    0.002110] ... bit width:              48

[    0.002114] ... generic registers:      4

[    0.002117] ... value mask:             0000ffffffffffff

[    0.002122] ... max period:             00007fffffffffff

[    0.002126] ... fixed-purpose events:   0

[    0.002129] ... event mask:             000000000000000f

[    0.002636] ACPI: Core revision 20100428

[    0.015012] ftrace: converting mcount calls to 0f 1f 44 00 00

[    0.015020] ftrace: allocating 23137 entries in 46 pages

[    0.016103] Enabling APIC mode:  Flat.  Using 1 I/O APICs

[    0.016793] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.027142] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 01

[    0.027999] Booting Node   0, Processors  #1 Ok.

[    0.001999] Initializing CPU#1

[    0.098103] Brought up 2 CPUs

[    0.098106] Total of 2 processors activated (7634.99 BogoMIPS).

[    0.098101] System has AMD C1E enabled

[    0.098101] Switch to broadcast mode on CPU1

[    0.098356] sizeof(vma)=88 bytes

[    0.098358] sizeof(page)=32 bytes

[    0.098360] sizeof(inode)=352 bytes

[    0.098362] sizeof(dentry)=132 bytes

[    0.098363] sizeof(ext3inode)=508 bytes

[    0.098365] sizeof(buffer_head)=56 bytes

[    0.098367] sizeof(skbuff)=192 bytes

[    0.098369] sizeof(task_struct)=3228 bytes

[    0.098423] Switch to broadcast mode on CPU0

[    0.098423] devtmpfs: initialized

[    0.099049] atomic64 test passed for i586+ platform with CX8 and with SSE

[    0.099096] Time: 17:45:53  Date: 04/22/11

[    0.099149] NET: Registered protocol family 16

[    0.099268] node 0 link 0: io port [1000, fffff]

[    0.099272] TOM: 0000000080000000 aka 2048M

[    0.099276] node 0 link 0: mmio [a0000, bffff]

[    0.099280] node 0 link 0: mmio [80000000, dfffffff]

[    0.099283] node 0 link 0: mmio [e0000000, efffffff]

[    0.099286] node 0 link 0: mmio [f0000000, fe0bffff]

[    0.099290] bus: [00, ff] on node 0 link 0

[    0.099294] bus: 00 index 0 [io  0x0000-0xffff]

[    0.099297] bus: 00 index 1 [mem 0x000a0000-0x000bffff]

[    0.099300] bus: 00 index 2 [mem 0x80000000-0xffffffff]

[    0.099316] ACPI: bus type pci registered

[    0.099410] PCI: MMCONFIG for domain 0000 [bus 00-08] at [mem 0xe0000000-0xe08fffff] (base 0xe0000000)

[    0.099414] PCI: MMCONFIG at [mem 0xe0000000-0xe08fffff] reserved in E820

[    0.099417] PCI: Using MMCONFIG for extended config space

[    0.099419] PCI: Using configuration type 1 for base access

[    0.102045] bio: create slab <bio-0> at 0

[    0.103728] ACPI: EC: Look up EC in DSDT

[    0.106929] ACPI: BIOS _OSI(Linux) query ignored

[    0.107956] ACPI: Interpreter enabled

[    0.107959] ACPI: (supports S0 S3 S4 S5)

[    0.107984] ACPI: Using IOAPIC for interrupt routing

[    0.119785] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62

[    0.120177] ACPI: No dock devices found.

[    0.120182] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug

[    0.120332] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.120621] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)

[    0.120624] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)

[    0.120628] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)

[    0.120631] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)

[    0.120635] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)

[    0.120638] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)

[    0.120642] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)

[    0.120645] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)

[    0.120648] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)

[    0.120652] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)

[    0.120655] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)

[    0.120659] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)

[    0.120663] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)

[    0.120667] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)

[    0.120670] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)

[    0.120673] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)

[    0.120677] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)

[    0.120680] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)

[    0.120830] pci 0000:00:01.0: reg 10: [io  0x1d00-0x1dff]

[    0.120867] pci 0000:00:01.1: reg 10: [io  0x3080-0x30bf]

[    0.120879] pci 0000:00:01.1: reg 20: [io  0x3040-0x307f]

[    0.120884] pci 0000:00:01.1: reg 24: [io  0x3000-0x303f]

[    0.120905] pci 0000:00:01.1: PME# supported from D3hot D3cold

[    0.120911] pci 0000:00:01.1: PME# disabled

[    0.120941] pci 0000:00:01.3: reg 10: [mem 0xb0080000-0xb00fffff]

[    0.121024] pci 0000:00:02.0: reg 10: [mem 0xb0006000-0xb0006fff]

[    0.121049] pci 0000:00:02.0: supports D1 D2

[    0.121051] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.121056] pci 0000:00:02.0: PME# disabled

[    0.121077] pci 0000:00:02.1: reg 10: [mem 0xb0007000-0xb00070ff]

[    0.121106] pci 0000:00:02.1: supports D1 D2

[    0.121109] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold

[    0.121113] pci 0000:00:02.1: PME# disabled

[    0.121141] pci 0000:00:06.0: reg 10: [mem 0xb0008000-0xb0008fff]

[    0.121146] pci 0000:00:06.0: reg 14: [io  0x30e0-0x30e7]

[    0.121167] pci 0000:00:06.0: supports D1 D2

[    0.121170] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.121175] pci 0000:00:06.0: PME# disabled

[    0.121198] pci 0000:00:07.0: reg 10: [mem 0xb0000000-0xb0003fff]

[    0.121226] pci 0000:00:07.0: PME# supported from D3hot D3cold

[    0.121230] pci 0000:00:07.0: PME# disabled

[    0.121297] pci 0000:00:09.0: reg 20: [io  0x30c0-0x30cf]

[    0.121326] pci 0000:00:0a.0: reg 10: [io  0x30f8-0x30ff]

[    0.121331] pci 0000:00:0a.0: reg 14: [io  0x30ec-0x30ef]

[    0.121335] pci 0000:00:0a.0: reg 18: [io  0x30f0-0x30f7]

[    0.121340] pci 0000:00:0a.0: reg 1c: [io  0x30e8-0x30eb]

[    0.121344] pci 0000:00:0a.0: reg 20: [io  0x30d0-0x30df]

[    0.121349] pci 0000:00:0a.0: reg 24: [mem 0xb0004000-0xb0005fff]

[    0.121398] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.121402] pci 0000:00:0b.0: PME# disabled

[    0.121436] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.121439] pci 0000:00:0c.0: PME# disabled

[    0.121473] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.121476] pci 0000:00:0d.0: PME# disabled

[    0.121510] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.121513] pci 0000:00:0e.0: PME# disabled

[    0.121608] PCI: peer root bus 00 res updated from pci conf

[    0.121650] pci 0000:07:05.0: proprietary Ricoh MMC controller disabled (via firewire function)

[    0.121654] pci 0000:07:05.0: MMC cards are now supported by standard SDHCI controller

[    0.121663] pci 0000:07:05.0: reg 10: [mem 0xb0100000-0xb01007ff]

[    0.121697] pci 0000:07:05.0: supports D1 D2

[    0.121699] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.121704] pci 0000:07:05.0: PME# disabled

[    0.121727] pci 0000:07:05.1: reg 10: [mem 0xb0100800-0xb01008ff]

[    0.121761] pci 0000:07:05.1: supports D1 D2

[    0.121764] pci 0000:07:05.1: PME# supported from D0 D1 D2 D3hot D3cold

[    0.121768] pci 0000:07:05.1: PME# disabled

[    0.121791] pci 0000:07:05.2: reg 10: [mem 0xb0101000-0xb01010ff]

[    0.121825] pci 0000:07:05.2: supports D1 D2

[    0.121827] pci 0000:07:05.2: PME# supported from D0 D1 D2 D3hot D3cold

[    0.121832] pci 0000:07:05.2: PME# disabled

[    0.121855] pci 0000:07:05.3: reg 10: [mem 0xb0101400-0xb01014ff]

[    0.121889] pci 0000:07:05.3: supports D1 D2

[    0.121892] pci 0000:07:05.3: PME# supported from D0 D1 D2 D3hot D3cold

[    0.121896] pci 0000:07:05.3: PME# disabled

[    0.121932] pci 0000:00:08.0: PCI bridge to [bus 07-07] (subtractive decode)

[    0.121936] pci 0000:00:08.0:   bridge window [io  0xf000-0x0000] (disabled)

[    0.121941] pci 0000:00:08.0:   bridge window [mem 0xb0100000-0xb01fffff]

[    0.121945] pci 0000:00:08.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)

[    0.121949] pci 0000:00:08.0:   bridge window [io  0x0000-0xffff] (subtractive decode)

[    0.121953] pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)

[    0.121956] pci 0000:00:08.0:   bridge window [mem 0x80000000-0xffffffff] (subtractive decode)

[    0.121982] pci 0000:00:0b.0: PCI bridge to [bus 01-01]

[    0.121986] pci 0000:00:0b.0:   bridge window [io  0xf000-0x0000] (disabled)

[    0.121990] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)

[    0.121995] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)

[    0.122054] pci 0000:03:00.0: reg 10: [mem 0xb0200000-0xb0203fff 64bit]

[    0.122104] pci 0000:03:00.0: supports D1 D2

[    0.124014] pci 0000:00:0c.0: PCI bridge to [bus 03-03]

[    0.124019] pci 0000:00:0c.0:   bridge window [io  0xf000-0x0000] (disabled)

[    0.124023] pci 0000:00:0c.0:   bridge window [mem 0xb0200000-0xb02fffff]

[    0.124027] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)

[    0.124079] pci 0000:05:00.0: reg 10: [mem 0xb1000000-0xb1ffffff]

[    0.124094] pci 0000:05:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]

[    0.124108] pci 0000:05:00.0: reg 1c: [mem 0xb2000000-0xb3ffffff 64bit]

[    0.124117] pci 0000:05:00.0: reg 24: [io  0x4000-0x407f]

[    0.124126] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]

[    0.126011] pci 0000:00:0d.0: PCI bridge to [bus 05-05]

[    0.126016] pci 0000:00:0d.0:   bridge window [io  0x4000-0x4fff]

[    0.126019] pci 0000:00:0d.0:   bridge window [mem 0xb1000000-0xb3ffffff]

[    0.126024] pci 0000:00:0d.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]

[    0.126049] pci 0000:00:0e.0: PCI bridge to [bus 09-09]

[    0.126053] pci 0000:00:0e.0:   bridge window [io  0x5000-0x5fff]

[    0.126057] pci 0000:00:0e.0:   bridge window [mem 0xb4000000-0xb5ffffff]

[    0.126062] pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xd01fffff 64bit pref]

[    0.126073] pci_bus 0000:00: on NUMA node 0

[    0.126079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[    0.126173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]

[    0.126218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]

[    0.126263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]

[    0.126300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]

[    0.126344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR3._PRT]

[    0.153679] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *15

[    0.153889] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *10

[    0.154102] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.

[    0.154310] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.

[    0.154517] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11

[    0.154726] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.

[    0.154934] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.

[    0.155148] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *15

[    0.155357] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)

[    0.155564] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11

[    0.155772] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7

[    0.155981] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10

[    0.156195] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *11

[    0.156408] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.

[    0.156616] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5

[    0.156828] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *0, disabled.

[    0.156879] HEST: Table is not found!

[    0.156985] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none

[    0.156988] vgaarb: loaded

[    0.157119] SCSI subsystem initialized

[    0.157134] libata version 3.00 loaded.

[    0.157134] usbcore: registered new interface driver usbfs

[    0.157134] usbcore: registered new interface driver hub

[    0.157134] usbcore: registered new device driver usb

[    0.157134] PCI: Using ACPI for IRQ routing

[    0.157134] PCI: pci_cache_line_size set to 64 bytes

[    0.157169] reserve RAM buffer: 000000000009dc00 - 000000000009ffff 

[    0.157172] reserve RAM buffer: 000000007ff60000 - 000000007fffffff 

[    0.157292] NetLabel: Initializing

[    0.157295] NetLabel:  domain hash size = 128

[    0.157297] NetLabel:  protocols = UNLABELED CIPSOv4

[    0.157313] NetLabel:  unlabeled traffic allowed by default

[    0.157320] HPET: 3 timers in total, 0 timers will be used for per-cpu timer

[    0.157327] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31

[    0.157332] hpet0: 3 comparators, 32-bit 25.000000 MHz counter

[    0.161042] Switching to clocksource hpet

[    0.176416] pnp: PnP ACPI init

[    0.176441] ACPI: bus type pnp registered

[   22.392123] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20100428/dsopcode-597)

[   22.392131] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node f6830810), AE_AML_BUFFER_LIMIT

[   22.392167] ACPI Error (uteval-0250): Method execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node f6830810), AE_AML_BUFFER_LIMIT

[   22.392176] pnp 00:03: can't evaluate _CRS: 12298

[   22.394101] pnp: PnP ACPI: found 12 devices

[   22.394171] ACPI: ACPI bus type pnp unregistered

[   22.394187] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved

[   22.394198] system 00:04: [io  0x0360-0x0361] has been reserved

[   22.394203] system 00:04: [io  0x04d0-0x04d1] has been reserved

[   22.394212] system 00:0b: [mem 0xffc00000-0xffffffff] could not be reserved

[   22.394217] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved

[   22.394221] system 00:0b: [mem 0xfed00000-0xfed00fff] has been reserved

[   22.394225] system 00:0b: [mem 0xfec80000-0xfec80fff] has been reserved

[   22.394229] system 00:0b: [mem 0xfef00000-0xfef00fff] has been reserved

[   22.431125] pci 0000:00:08.0: PCI bridge to [bus 07-07]

[   22.431129] pci 0000:00:08.0:   bridge window [io  disabled]

[   22.431134] pci 0000:00:08.0:   bridge window [mem 0xb0100000-0xb01fffff]

[   22.431137] pci 0000:00:08.0:   bridge window [mem pref disabled]

[   22.431142] pci 0000:00:0b.0: PCI bridge to [bus 01-01]

[   22.431145] pci 0000:00:0b.0:   bridge window [io  disabled]

[   22.431149] pci 0000:00:0b.0:   bridge window [mem disabled]

[   22.431153] pci 0000:00:0b.0:   bridge window [mem pref disabled]

[   22.431157] pci 0000:00:0c.0: PCI bridge to [bus 03-03]

[   22.431160] pci 0000:00:0c.0:   bridge window [io  disabled]

[   22.431164] pci 0000:00:0c.0:   bridge window [mem 0xb0200000-0xb02fffff]

[   22.431167] pci 0000:00:0c.0:   bridge window [mem pref disabled]

[   22.431175] pci 0000:05:00.0: BAR 6: can't assign mem pref (size 0x20000)

[   22.431178] pci 0000:00:0d.0: PCI bridge to [bus 05-05]

[   22.431182] pci 0000:00:0d.0:   bridge window [io  0x4000-0x4fff]

[   22.431186] pci 0000:00:0d.0:   bridge window [mem 0xb1000000-0xb3ffffff]

[   22.431190] pci 0000:00:0d.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]

[   22.431195] pci 0000:00:0e.0: PCI bridge to [bus 09-09]

[   22.431198] pci 0000:00:0e.0:   bridge window [io  0x5000-0x5fff]

[   22.431202] pci 0000:00:0e.0:   bridge window [mem 0xb4000000-0xb5ffffff]

[   22.431206] pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xd01fffff 64bit pref]

[   22.431217] pci 0000:00:08.0: setting latency timer to 64

[   22.431224] pci 0000:00:0b.0: setting latency timer to 64

[   22.431230] pci 0000:00:0c.0: setting latency timer to 64

[   22.431237] pci 0000:00:0d.0: setting latency timer to 64

[   22.431243] pci 0000:00:0e.0: setting latency timer to 64

[   22.431246] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]

[   22.431250] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]

[   22.431253] pci_bus 0000:00: resource 6 [mem 0x80000000-0xffffffff]

[   22.431257] pci_bus 0000:07: resource 1 [mem 0xb0100000-0xb01fffff]

[   22.431260] pci_bus 0000:07: resource 4 [io  0x0000-0xffff]

[   22.431263] pci_bus 0000:07: resource 5 [mem 0x000a0000-0x000bffff]

[   22.431267] pci_bus 0000:07: resource 6 [mem 0x80000000-0xffffffff]

[   22.431270] pci_bus 0000:03: resource 1 [mem 0xb0200000-0xb02fffff]

[   22.431274] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]

[   22.431277] pci_bus 0000:05: resource 1 [mem 0xb1000000-0xb3ffffff]

[   22.431280] pci_bus 0000:05: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]

[   22.431284] pci_bus 0000:09: resource 0 [io  0x5000-0x5fff]

[   22.431287] pci_bus 0000:09: resource 1 [mem 0xb4000000-0xb5ffffff]

[   22.431291] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref]

[   22.431323] NET: Registered protocol family 2

[   22.431365] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[   22.431557] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[   22.432304] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[   22.432632] TCP: Hash tables configured (established 131072 bind 65536)

[   22.432636] TCP reno registered

[   22.432640] UDP hash table entries: 512 (order: 2, 16384 bytes)

[   22.432653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[   22.432755] NET: Registered protocol family 1

[   22.432905] pci 0000:00:00.0: Found enabled HT MSI Mapping

[   22.432960] pci 0000:00:00.0: Found enabled HT MSI Mapping

[   22.433050] pci 0000:00:00.0: Found enabled HT MSI Mapping

[   22.433120] pci 0000:00:00.0: Found enabled HT MSI Mapping

[   22.433196] pci 0000:00:00.0: Found enabled HT MSI Mapping

[   22.433277] pci 0000:00:00.0: Found enabled HT MSI Mapping

[   22.433318] pci 0000:05:00.0: Boot video device

[   22.433323] PCI: CLS 64 bytes, default 64

[   22.433414] Trying to unpack rootfs image as initramfs...

[   22.862987] Freeing initrd memory: 12588k freed

[   22.871025] Simple Boot Flag at 0x36 set to 0x1

[   22.871478] apm: BIOS not found.

[   22.871651] audit: initializing netlink socket (disabled)

[   22.871667] type=2000 audit(1303494375.870:1): initialized

[   22.887245] highmem bounce pool size: 64 pages

[   22.887268] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[   22.889265] VFS: Disk quotas dquot_6.5.2

[   22.889326] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[   22.889941] msgmni has been set to 1688

[   22.890021] SELinux:  Registering netfilter hooks

[   22.890531] alg: No test for stdrng (krng)

[   22.890607] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[   22.890611] io scheduler noop registered

[   22.890613] io scheduler deadline registered

[   22.890631] io scheduler cfq registered (default)

[   22.890845] pcieport 0000:00:0b.0: setting latency timer to 64

[   22.890871] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X

[   22.890935] pcieport 0000:00:0c.0: setting latency timer to 64

[   22.890954] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X

[   22.891030] pcieport 0000:00:0d.0: setting latency timer to 64

[   22.891048] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X

[   22.891115] pcieport 0000:00:0e.0: setting latency timer to 64

[   22.891134] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X

[   22.891230] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[   22.891264] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[   22.891267] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[   22.891668] acpiphp: Slot [1] registered

[   22.891737] acpiphp: Slot [1-1] registered

[   22.891808] pci-stub: invalid id string ""

[   22.894312] ACPI: AC Adapter [ACAD] (on-line)

[   22.894434] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0

[   22.896073] ACPI: Lid Switch [LID]

[   22.896172] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1

[   22.896177] ACPI: Power Button [PWRB]

[   22.896255] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2

[   22.896259] ACPI: Sleep Button [SLPB]

[   22.896337] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

[   22.896341] ACPI: Power Button [PWRF]

[   22.896681] ACPI: acpi_idle registered with cpuidle

[   22.896713] ACPI: processor limited to max C-state 1

[   22.903118] [Firmware Bug]: Invalid critical threshold (0)

[   22.905084] thermal LNXTHERM:01: registered as thermal_zone0

[   22.905095] ACPI: Thermal Zone [THRM] (48 C)

[   22.905114] ERST: Table is not found!

[   22.905128] isapnp: Scanning for PnP cards...

[   23.193165] ACPI: Battery Slot [BAT0] (battery present)

[   23.260882] isapnp: No Plug & Play device found

[   23.261290] Non-volatile memory driver v1.3

[   23.261293] Linux agpgart interface v0.103

[   23.261680] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[   23.263587] brd: module loaded

[   23.264344] loop: module loaded

[   23.264451] ahci 0000:00:0a.0: version 3.0

[   23.264819] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23

[   23.264833] ahci 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 23 (level, low) -> IRQ 23

[   23.264861] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP

[   23.264932] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode

[   23.264936] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pio ccc 

[   23.264940] ahci 0000:00:0a.0: setting latency timer to 64

[   23.265574] scsi0 : ahci

[   23.265733] scsi1 : ahci

[   23.265852] scsi2 : ahci

[   23.265999] scsi3 : ahci

[   23.266181] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23

[   23.266185] ata2: SATA max UDMA/133 abar m8192@0xb0004000 port 0xb0004180 irq 23

[   23.266188] ata3: SATA max UDMA/133 abar m8192@0xb0004000 port 0xb0004200 irq 23

[   23.266192] ata4: SATA max UDMA/133 abar m8192@0xb0004000 port 0xb0004280 irq 23

[   23.266314] Fixed MDIO Bus: probed

[   23.266412] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[   23.266780] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17

[   23.266794] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17

[   23.266815] ehci_hcd 0000:00:02.1: setting latency timer to 64

[   23.266819] ehci_hcd 0000:00:02.1: EHCI Host Controller

[   23.266898] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1

[   23.266926] ehci_hcd 0000:00:02.1: debug port 1

[   23.266935] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported

[   23.266963] ehci_hcd 0000:00:02.1: irq 17, io mem 0xb0007000

[   23.272028] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00

[   23.272060] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[   23.272064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[   23.272067] usb usb1: Product: EHCI Host Controller

[   23.272070] usb usb1: Manufacturer: Linux 2.6.35.6-45.fc14.i686 ehci_hcd

[   23.272073] usb usb1: SerialNumber: 0000:00:02.1

[   23.272217] hub 1-0:1.0: USB hub found

[   23.272223] hub 1-0:1.0: 10 ports detected

[   23.272338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[   23.272701] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18

[   23.272711] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18

[   23.272725] ohci_hcd 0000:00:02.0: setting latency timer to 64

[   23.272728] ohci_hcd 0000:00:02.0: OHCI Host Controller

[   23.272784] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2

[   23.272818] ohci_hcd 0000:00:02.0: irq 18, io mem 0xb0006000

[   23.325051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[   23.325054] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[   23.325057] usb usb2: Product: OHCI Host Controller

[   23.325060] usb usb2: Manufacturer: Linux 2.6.35.6-45.fc14.i686 ohci_hcd

[   23.325063] usb usb2: SerialNumber: 0000:00:02.0

[   23.325195] hub 2-0:1.0: USB hub found

[   23.325202] hub 2-0:1.0: 10 ports detected

[   23.325308] uhci_hcd: USB Universal Host Controller Interface driver

[   23.325420] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12

[   23.347432] serio: i8042 KBD port at 0x60,0x64 irq 1

[   23.347441] serio: i8042 AUX port at 0x60,0x64 irq 12

[   23.347522] mice: PS/2 mouse device common for all mice

[   23.347806] rtc_cmos 00:07: RTC can wake from S4

[   23.347862] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0

[   23.347904] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs

[   23.348055] device-mapper: uevent: version 1.0.3

[   23.348189] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: dm-devel@redhat.com

[   23.348294] cpuidle: using governor ladder

[   23.348297] cpuidle: using governor menu

[   23.348603] usbcore: registered new interface driver hiddev

[   23.348622] usbcore: registered new interface driver usbhid

[   23.348624] usbhid: USB HID core driver

[   23.348651] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[   23.348809] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use

[   23.348812] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or

[   23.348814] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

[   23.348907] ip_tables: (C) 2000-2006 Netfilter Core Team

[   23.348924] TCP cubic registered

[   23.348926] Initializing XFRM netlink socket

[   23.348938] NET: Registered protocol family 17

[   23.348971] Using IPI No-Shortcut mode

[   23.349096] PM: Resume from disk failed.

[   23.349113] registered taskstats version 1

[   23.349394]   Magic number: 7:679:795

[   23.349519] rtc_cmos 00:07: setting system clock to 2011-04-22 17:46:16 UTC (1303494376)

[   23.349571] Initalizing network drop monitor service

[   23.367912] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4

[   23.575030] ata2: SATA link down (SStatus 0 SControl 300)

[   23.575044] ata4: SATA link down (SStatus 0 SControl 300)

[   23.575055] ata3: SATA link down (SStatus 0 SControl 300)

[   23.676032] usb 1-4: new high speed USB device using ehci_hcd and address 3

[   23.803991] usb 1-4: New USB device found, idVendor=04f2, idProduct=b015

[   23.803994] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3

[   23.803997] usb 1-4: Product: HP Webcam

[   23.804000] usb 1-4: Manufacturer: Chicony Electronics Co., Ltd.

[   23.804003] usb 1-4: SerialNumber: SN0001

[   23.989031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[   23.989425] ata1.00: ATA-8: WDC WD2500BEVS-60UST0, 01.01A01, max UDMA/100

[   23.989430] ata1.00: 488397168 sectors, multi 16: LBA48 

[   23.989894] ata1.00: configured for UDMA/100

[   24.000210] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVS-6 01.0 PQ: 0 ANSI: 5

[   24.000427] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)

[   24.000431] sd 0:0:0:0: Attached scsi generic sg0 type 0

[   24.000495] sd 0:0:0:0: [sda] Write Protect is off

[   24.000499] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[   24.000552] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[   24.000739]  sda:

[   24.066273] usb 2-3: new full speed USB device using ohci_hcd and address 2

[   24.268706]  sda1 <

[   24.275047] usb 2-3: New USB device found, idVendor=03f0, idProduct=171d

[   24.275051] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[   24.275054] usb 2-3: Product: HP Integrated Module

[   24.275056] usb 2-3: Manufacturer: Broadcom Corp

[   24.280618]  sda5 sda6 sda7

[   24.310178] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0

[   24.324291]  sda8 sda9 > sda2

[   24.335451] sd 0:0:0:0: [sda] Attached SCSI disk

[   24.335481] Freeing unused kernel memory: 544k freed

[   24.335927] Write protecting the kernel text: 3764k

[   24.335999] Write protecting the kernel read-only data: 1840k

[   24.354543] dracut: dracut-006-3.fc14

[   24.362838] dracut: rd_NO_LUKS: removing cryptoluks activation

[   24.372466] udev[81]: starting version 161

[   24.385892] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5

[   24.432353] acpi device:26: registered as cooling_device2

[   24.432778] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/LNXVIDEO:01/input/input6

[   24.432894] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)

[   24.461708] [drm] Initialized drm 1.1.0 20060810

[   24.506923] nouveau 0000:05:00.0: power state changed by ACPI to D0

[   24.506960] nouveau 0000:05:00.0: power state changed by ACPI to D0

[   24.507311] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19

[   24.507326] nouveau 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19

[   24.507333] nouveau 0000:05:00.0: setting latency timer to 64

[   24.510661] [drm] nouveau 0000:05:00.0: Detected an NV50 generation card (0x086700a2)

[   24.514371] [drm] nouveau 0000:05:00.0: Attempting to load BIOS image from PRAMIN

[   24.589079] [drm] nouveau 0000:05:00.0: ... appears to be valid

[   24.589086] [drm] nouveau 0000:05:00.0: BIT BIOS found

[   24.589089] [drm] nouveau 0000:05:00.0: Bios version 60.86.4f.00

[   24.589094] [drm] nouveau 0000:05:00.0: TMDS table version 2.0

[   24.589097] [drm] nouveau 0000:05:00.0: BIT table 'd' not found

[   24.589100] [drm] nouveau 0000:05:00.0: Found Display Configuration Block version 4.0

[   24.589105] [drm] nouveau 0000:05:00.0: Raw DCB entry 0: 01000323 00000034

[   24.589109] [drm] nouveau 0000:05:00.0: Raw DCB entry 1: 02011300 00000028

[   24.589112] [drm] nouveau 0000:05:00.0: Raw DCB entry 2: 02022312 00020010

[   24.589115] [drm] nouveau 0000:05:00.0: Raw DCB entry 3: 010333f1 00c0c080

[   24.589119] [drm] nouveau 0000:05:00.0: Raw DCB entry 4: 0000000e 00000000

[   24.589123] [drm] nouveau 0000:05:00.0: DCB connector table: VHER 0x40 5 14 2

[   24.589127] [drm] nouveau 0000:05:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff

[   24.589131] [drm] nouveau 0000:05:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff

[   24.589135] [drm] nouveau 0000:05:00.0:   2: 0x00001261: type 0x61 idx 2 tag 0x07

[   24.589138] [drm] nouveau 0000:05:00.0:   3: 0x00000310: type 0x10 idx 3 tag 0xff

[   24.589142] [drm] nouveau 0000:05:00.0:   4: 0x00000311: type 0x11 idx 4 tag 0xff

[   24.589146] [drm] nouveau 0000:05:00.0:   5: 0x00000313: type 0x13 idx 5 tag 0xff

[   24.589151] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xC581

[   24.615135] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xC8D1

[   24.634024] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xD512

[   24.634034] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xD604

[   24.636099] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xD7FE

[   24.636103] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xD863

[   24.657026] [drm] nouveau 0000:05:00.0: 0xD863: Condition still not met after 20ms, skipping following opcodes

[   24.657045] [drm] nouveau 0000:05:00.0: Detected 128MiB VRAM

[   24.657120] [TTM] Zone  kernel: Available graphics memory: 432626 kiB.

[   24.657124] [TTM] Zone highmem: Available graphics memory: 1030326 kiB.

[   24.657128] [TTM] Initializing pool allocator.

[   24.671915] [drm] nouveau 0000:05:00.0: 512 MiB GART (aperture)

[   24.672621] [drm] nouveau 0000:05:00.0: DCB encoder 1 unknown

[   24.672624] [drm] nouveau 0000:05:00.0: TV-1 has no encoders, removing

[   25.671795] [drm] nouveau 0000:05:00.0: Allocating FIFO number 1

[   25.674668] [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 1

[   25.833475] [drm] nouveau 0000:05:00.0: allocated 1280x800 fb: 0x40260000, bo f5c01000

[   25.833552] fbcon: nouveaufb (fb0) is primary device

[   25.840590] Console: switching to colour frame buffer device 160x50

[   25.842923] fb0: nouveaufb frame buffer device

[   25.842925] drm: registered panic notifier

[   25.842929] Slow work thread pool: Starting up

[   25.843060] Slow work thread pool: Ready

[   25.843067] [drm] Initialized nouveau 0.0.16 20090420 for 0000:05:00.0 on minor 0

[   25.866760] dracut: Starting plymouth daemon

[   26.199215] dracut: rd_NO_DM: removing DM RAID activation

[   26.203696] dracut: rd_NO_MD: removing MD RAID activation

[   26.611372] pata_amd 0000:00:09.0: version 0.4.1

[   26.611428] pata_amd 0000:00:09.0: setting latency timer to 64

[   26.611495] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5

[   26.611514] firewire_ohci 0000:07:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5

[   26.611533] scsi4 : pata_amd

[   26.611690] scsi5 : pata_amd

[   26.612489] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14

[   26.612492] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15

[   26.682031] firewire_ohci: Added fw-ohci device 0000:07:05.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0

[   26.766335] ata5.00: ATAPI: Optiarc DVD RW AD-7561A, GH09, max MWDMA2

[   26.766364] ata5: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)

[   26.772271] ata5.00: configured for MWDMA2

[   26.773556] scsi 4:0:0:0: CD-ROM            Optiarc  DVD RW AD-7561A  GH09 PQ: 0 ANSI: 5

[   26.778666] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[   26.778670] Uniform CD-ROM driver Revision: 3.20

[   26.778814] sr 4:0:0:0: Attached scsi CD-ROM sr0

[   26.778904] sr 4:0:0:0: Attached scsi generic sg1 type 5

[   26.778992] ata6: port disabled. ignoring.

[   26.787440] sdhci: Secure Digital Host Controller Interface driver

[   26.787445] sdhci: Copyright(c) Pierre Ossman

[   26.790408] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 22)

[   26.790787] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7

[   26.790802] sdhci-pci 0000:07:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7

[   26.791844] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.

[   26.792920] Registered led device: mmc0::

[   26.793990] mmc0: SDHCI controller on PCI [0000:07:05.1] using DMA

[   27.181415] firewire_core: created device fw0: GUID 00241b00b6497c00, S400

[   27.429765] dracut: Scanning devices sda9  for LVM logical volumes vg_wojtas/lv_root vg_wojtas/lv_swap 

[   27.594948] dracut: inactive '/dev/vg_wojtas/lv_root' [50.00 GiB] inherit

[   27.595072] dracut: inactive '/dev/vg_wojtas/lv_home' [5.62 GiB] inherit

[   27.595179] dracut: inactive '/dev/vg_wojtas/lv_swap' [3.94 GiB] inherit

[   27.993421] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)

[   28.056154] dracut: Mounted root filesystem /dev/mapper/vg_wojtas-lv_root

[   28.188614] dracut: Loading SELinux policy

[   28.465670] type=1404 audit(1303494381.615:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295

[   28.631476] SELinux: 2048 avtab hash slots, 204971 rules.

[   28.705276] SELinux: 2048 avtab hash slots, 204971 rules.

[   29.128359] SELinux:  9 users, 14 roles, 3433 types, 179 bools, 1 sens, 1024 cats

[   29.128365] SELinux:  77 classes, 204971 rules

[   29.134182] SELinux:  Completing initialization.

[   29.134185] SELinux:  Setting up existing superblocks.

[   29.134198] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

[   29.134207] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts

[   29.134743] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts

[   29.134753] SELinux: initialized (dev proc, type proc), uses genfs_contexts

[   29.134763] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[   29.134789] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs

[   29.136109] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs

[   29.136116] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts

[   29.137646] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs

[   29.137657] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts

[   29.137663] SELinux: initialized (dev devpts, type devpts), uses transition SIDs

[   29.137697] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs

[   29.137709] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs

[   29.137725] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts

[   29.137751] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts

[   29.137759] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

[   29.138419] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[   29.138446] SELinux: initialized (dev dm-0, type ext4), uses xattr

[   29.141971] type=1403 audit(1303494382.291:3): policy loaded auid=4294967295 ses=4294967295

[   29.725568] dracut: Switching root

[   30.535039] readahead-collector: starting

[   31.669527] udev[469]: starting version 161

[   32.253947] ACPI: WMI: Mapper loaded

[   32.396842] i2c i2c-3: nForce2 SMBus adapter at 0x3040

[   32.396870] i2c i2c-4: nForce2 SMBus adapter at 0x3000

[   32.405197] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.

[   32.405636] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20

[   32.405651] forcedeth 0000:00:06.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20

[   32.405657] forcedeth 0000:00:06.0: setting latency timer to 64

[   32.490942] input: HP WMI hotkeys as /devices/virtual/input/input7

[   32.625946] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16

[   32.625961] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK1E] -> GSI 16 (level, low) -> IRQ 16

[   32.625972] b43-pci-bridge 0000:03:00.0: setting latency timer to 64

[   32.635889] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243)

[   32.635898] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243)

[   32.635905] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243)

[   32.635912] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243)

[   32.654365] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0

[   32.919197] forcedeth 0000:00:06.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:c8:8b:96

[   32.919203] forcedeth 0000:00:06.0: highdma pwrctl mgmt gbit lnktim msi desc-v3

[   32.919406] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141

[   32.949524] r852 0000:07:05.3: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7

[   32.961670] r852: Non dma capable device detected, dma disabled

[   32.961694] r852: driver loaded succesfully

[   33.231341] Bluetooth: Core ver 2.15

[   33.231374] NET: Registered protocol family 31

[   33.231376] Bluetooth: HCI device and connection manager initialized

[   33.231381] Bluetooth: HCI socket layer initialized

[   33.437912] Linux video capture interface: v2.00

[   33.457787] Bluetooth: Generic Bluetooth USB driver ver 0.6

[   33.459441] usbcore: registered new interface driver btusb

[   33.533333] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b015)

[   33.536987] input: HP Webcam as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0/input/input8

[   33.537130] usbcore: registered new interface driver uvcvideo

[   33.537133] USB Video Class driver (v0.1.0)

[   33.621368] microcode: microcode: CPU0: AMD CPU family 0xf not supported

[   33.621382] microcode: microcode: CPU1: AMD CPU family 0xf not supported

[   33.621478] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[   33.954420] cfg80211: Calling CRDA to update world regulatory domain

[   34.363416] b43-phy0: Broadcom 4311 WLAN found (core revision 13)

[   34.385287] audit: name_count maxed, losing inode data: dev=00:07, inode=11107

[   34.385294] audit: name_count maxed, losing inode data: dev=00:07, inode=11107

[   34.385300] audit: name_count maxed, losing inode data: dev=00:07, inode=11107

[   34.385306] audit: name_count maxed, losing inode data: dev=00:07, inode=11107

[   34.385312] audit: name_count maxed, losing inode data: dev=00:07, inode=11107

[   34.385318] audit: name_count maxed, losing inode data: dev=00:07, inode=11107

[   34.385324] audit: name_count maxed, losing inode data: dev=00:07, inode=11107

[   34.385333] audit: name_count maxed, losing inode data: dev=00:07, inode=11107

[   34.385338] audit: name_count maxed, losing inode data: dev=00:07, inode=11107

[   34.385347] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   34.385352] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   34.385358] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   34.385364] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   34.385369] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   34.385375] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   34.385385] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   34.385391] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   34.385396] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   34.385402] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   34.385407] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   34.385412] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   34.385417] audit: name_count maxed, losing inode data: dev=00:07, inode=11125

[   35.020651] cfg80211: World regulatory domain updated:

[   35.020656]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[   35.020660]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   35.020664]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[   35.020667]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[   35.020670]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   35.020674]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   35.238147] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21

[   35.238164] HDA Intel 0000:00:07.0: PCI INT B -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21

[   35.238170] hda_intel: Disable MSI for Nvidia chipset

[   35.238243] HDA Intel 0000:00:07.0: setting latency timer to 64

[   35.253404] audit: name_count maxed, losing inode data: dev=00:07, inode=11107

[   35.253412] audit: name_count maxed, losing inode data: dev=00:07, inode=11227

[   35.253416] phy0: Selected rate control algorithm 'minstrel'

[   35.253436] audit: name_count maxed, losing inode data: dev=00:07, inode=11107

[   35.253442] audit: name_count maxed, losing inode data: dev=00:07, inode=11229

[   35.253448] audit: name_count maxed, losing inode data: dev=00:07, inode=11229

[   35.253460] audit: name_count maxed, losing inode data: dev=00:07, inode=11229

[   35.253466] audit: name_count maxed, losing inode data: dev=00:07, inode=11229

[   35.253472] audit: name_count maxed, losing inode data: dev=00:07, inode=11229

[   35.253478] audit: name_count maxed, losing inode data: dev=00:07, inode=11229

[   35.253483] audit: name_count maxed, losing inode data: dev=00:07, inode=11229

[   35.253489] audit: name_count maxed, losing inode data: dev=00:07, inode=11229

[   35.253669] Registered led device: b43-phy0::tx

[   35.253694] Registered led device: b43-phy0::rx

[   35.253721] Registered led device: b43-phy0::radio

[   35.253754] audit: name_count maxed, losing inode data: dev=00:05, inode=4

[   35.253780] audit: name_count maxed, losing inode data: dev=00:05, inode=4

[   35.253829] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]

[   36.887950] cfg80211: Calling CRDA for country: PL

[   36.898121] cfg80211: Regulatory domain changed to country: PL

[   36.898125]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[   36.898129]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[   36.898133]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[   36.898136]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[   36.898139]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)

[   39.038607] EXT4-fs (dm-0): re-mounted. Opts: (null)

[   39.624351] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)

[   39.628268] SELinux: initialized (dev sda8, type ext4), uses xattr

[   39.663080] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)

[   39.663094] SELinux: initialized (dev dm-2, type ext4), uses xattr

[   41.050213] Adding 4128764k swap on /dev/mapper/vg_wojtas-lv_swap.  Priority:-1 extents:1 across:4128764k 

[   41.053872] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

[   41.397617] readahead-disable-service: delaying service auditd

[   42.785223] NET: Registered protocol family 10

[   42.785569] lo: Disabled Privacy Extensions

[   42.794822] ip6_tables: (C) 2000-2006 Netfilter Core Team

[   43.417365] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 (2 cpu cores) (version 2.20.00)

[   43.417438] powernow-k8:    0 : fid 0xb (1900 MHz), vid 0x11

[   43.417442] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x12

[   43.417445] powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x13

[   43.417447] powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x1e

[   44.001276] Clocksource tsc unstable (delta = -150936480 ns)

[   46.916535] eth0: no link during initialization.

[   46.918264] ADDRCONF(NETDEV_UP): eth0: link is not ready

[   47.050074] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found

[   47.050087] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found

[   47.050095] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.

[   47.819552] RPC: Registered udp transport module.

[   47.819562] RPC: Registered tcp transport module.

[   47.819569] RPC: Registered tcp NFSv4.1 backchannel transport module.

[   47.834681] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts

[   52.123164] Bluetooth: L2CAP ver 2.14

[   52.123168] Bluetooth: L2CAP socket layer initialized

[   52.147494] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   52.147499] Bluetooth: BNEP filters: protocol multicast

[   52.175362] Bluetooth: SCO (Voice Link) ver 0.6

[   52.175371] Bluetooth: SCO socket layer initialized

[   52.416466] Bluetooth: RFCOMM TTY layer initialized

[   52.416484] Bluetooth: RFCOMM socket layer initialized

[   52.416491] Bluetooth: RFCOMM ver 1.11

[   59.393954] [drm] nouveau 0000:05:00.0: Allocating FIFO number 2

[   59.397022] [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 2

[  122.054002] [drm] nouveau 0000:05:00.0: nouveau_channel_free: freeing fifo 2

[  124.255781] [drm] nouveau 0000:05:00.0: Allocating FIFO number 2

[  124.258828] [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 2

[  133.341062] type=1305 audit(1303487286.065:44620): auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 op="remove rule" key=(null) list=4 res=1

[  133.341080] type=1305 audit(1303487286.065:44621): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1

[  133.345051] type=1307 audit(1303487286.064:44619):  cwd="/var/gdm"

[  133.345089] type=1302 audit(1303487286.064:44619): item=0 name="/usr/share/X11/xkb/compat/mousekeys" inode=1048710 dev=fd:00 mode=0100644 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:usr_t:s0

[  135.484920] readahead-collector: starting delayed service auditd

[  135.825537] readahead-collector: sorting

[  136.096666] readahead-collector: finished

[  144.838810] fuse init (API version 7.14)

[  144.881829] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

[  144.933157] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts

[  225.905782] usb 2-3: USB disconnect, address 2

[  225.906048] btusb_bulk_complete: hci0 urb f5d89500 failed to resubmit (19)

[  225.906066] btusb_intr_complete: hci0 urb f4024700 failed to resubmit (19)

[  225.907045] btusb_bulk_complete: hci0 urb f4024000 failed to resubmit (19)

[  225.907279] btusb_send_frame: hci0 urb f2dcaf00 submission failed

[  227.805675] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found

[  227.805690] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found

[  227.805699] b43-phy0 E

Podobne wątki
Wątek:		Autor	Odpowiedzi:	Wyświetleń:	Ostatni post
	Najtańsza karta graficzna ze złączem AGP pod Ubuntu 12.04	yarekku	2	197	09.04.2012 11:33:11 Ostatni post: eMcE
	Głośniki laptopa , karta Intel 82801CA-ICH3 , compaq presario2700[problem rozwiązany]	ciechu1989	1	117	20.02.2012 15:54:07 Ostatni post: eMcE
	Nowy laptop - jaka karta graf. działa bezproblemowo?	miodo	10	1 843	09.04.2011 13:23:07 Ostatni post: miodo
	[ROZWIĄZANE] Asus K52DE i karta dźwiękowa (ubuntu 10.04)	Ramzes	2	1 134	17.11.2010 07:02:11 Ostatni post: Grzesiek2305
	[solved] Karta dźwiękowa i Ubuntu	wiktors01	0	949	13.10.2010 07:00:39 Ostatni post: wiktors01
	Karta dźwiękowa Realtek kłóci się z pulseaudio	kemezrp	6	1 815	08.10.2010 17:54:32 Ostatni post: kemezrp
	karta dźwiękowa USB	waldi11	6	1 982	11.09.2010 22:32:39 Ostatni post: waldi11
	Domyślna karta dźwiękowa//Zanikanie dźwięku	Savaceric	4	1 490	05.09.2010 14:01:06 Ostatni post: Savaceric
	Karta TV	miodo	2	903	03.09.2010 12:11:40 Ostatni post: siemien
	karta SD 1GB problem	salty	4	1 252	30.06.2010 08:35:54 Ostatni post: kajttek

Tryb drzewa \| Tryb normalny Karta wi-fi laptop
Autor	Wiadomość